XEOTOX 100 Unit

ingredients : Clostridium Botulnum Toxin Type A
Areas : Face, neck
Duration : 6 months
Unit : 1 vial
Application : facial asymmetry caused by muscle activity, lip contouring, eyebrows and forehead mimic wrinkles, crow's feet
nasolabial folds, wrinkles in the neck, hyperhidrosis

DESCRIPTION

Cosmetic effect with XEOTOX100 U injections is observed after 3-7 days
The duration of the effect is approximately 6-9 months
As a rule, 2-3 procedures are necessary per year, because muscle tone is restored over time.

METOX does not affect adjacent muscles and does not negatively affect facial expressions)
Minimal pain while injection procedure
Faster effect  that lasts over time
Excellent patient tolerance
Stable toxicity from batch to batch of drugs
Proven therapeutic equivalence with b otox

How To Dilute XEOTOX 100U?

XEOTOX 100U comes in a vial containing a fine, freeze-dried powder containing 100 units of Botulin that needs to be diluted with 0.9% saline.

Note: The toxin powder is very fine, so it could appear as if your vial is empty. Rest assured that all of your units are accounted for.

Follow the following steps to dilute & reconstitute your toxin

Take the vial out of the refrigerator and visually inspect: the vial should be colorless and transparent with a small quantity of white/light yellow freeze-dried powder.

Using the table below, draw Saline (0.9% Sodium Chloride) into a syringe and slowly add it to the XEOTOX 100U vial.

Gently and slowly swirl the vial to mix, do not shake excessively.

The reconstituted product should be kept in the refrigerator (2-8℃) and used within 24 hours.

Note: Manufacturers recommend using the toxin within 24 hours of dilution, but research has shown that the reconstituted product remains stable for up to 4 weeks in the refrigerator (2-8℃).

Treatment Protocol

Dilute the toxin using 2.5ml of saline to get 4U/0.1ml. Use a 30G needle to inject 0.1ml per injection point in the corrugator muscles and the procerus muscle, injecting a total of 5 points as indicated on the image below. This corresponds to 20U of Botulinum t.

XEOTOX 100U can also be used for injection into the masseter muscles (jaw muscles) to manage teeth grinding and jaw clenching and helps to contour the shape of the jaw.

XEOTOX 100Units from KOREA

XEOTOX is a state-of-the-art Botuli made in South Korea by SECRETPHARM Co. It is approved by the KFDA and targets forehead lines and wrinkles, glabellar lines, and crow’s feet, and can also be used in your masseter muscles.

How Does It Work?

XEOTOX is a Botuli that comes in a fine powder that needs to be diluted with 0.9% saline. Upon injection into the muscle, the toxin blocks signals that cause the muscle to move. This injected muscle can no longer contract, which helps wrinkles caused by movement to relax and soften and prevents new ones from forming. Results can often be seen after 5~14 days and can last up to 4 months.

Main Benefits

Targets wrinkles on the forehead, around the eyes, between the eyebrows: Smooths out wrinkles by inhibiting muscle movement and prevents further wrinkle formation.

Safe and low immune resistance risk: XEOTOX 100U is manufactured from the original Botulinum toxin strain from the European National Institute and complies with the cGMP. Low protein content leads to low risk of immune resistance.

High purity for faster and more consistent effect: High purity (99.8%) and high biological activity result in fast and consistent results.

How To Dilute XEOTOX 100U?

XEOTOX 100U comes in a vial containing a fine, freeze-dried powder containing 100 units of Botulin that needs to be diluted with 0.9% saline.

Note: The toxin powder is very fine, so it could appear as if your vial is empty. Rest assured that all of your units are accounted for.

Follow the following steps to dilute & reconstitute your toxin

Take the vial out of the refrigerator and visually inspect: the vial should be colorless and transparent with a small quantity of white/light yellow freeze-dried powder.

Using the table below, draw Saline (0.9% Sodium Chloride) into a syringe and slowly add it to the XEOTOX 100U vial.

Gently and slowly swirl the vial to mix, do not shake excessively.

The reconstituted product should be kept in the refrigerator (2-8℃) and used within 24 hours.

Note: Manufacturers recommend using the toxin within 24 hours of dilution, but research has shown that the reconstituted product remains stable for up to 4 weeks in the refrigerator (2-8℃).

Treatment Protocol

Dilute the toxin using 2.5ml of saline to get 4U/0.1ml. Use a 30G needle to inject 0.1ml per injection point in the corrugator muscles and the procerus muscle, injecting a total of 5 points as indicated on the image below. This corresponds to 20U of Botulinum t.

XEOTOX 100U can also be used for injection into the masseter muscles (jaw muscles) to manage teeth grinding and jaw clenching and helps to contour the shape of the jaw.

Ingredients

Human Serum Albumin – 0.5mg

Sodium Chloride – 0.9mg

What’s Inside

1 vial / 100U

Storage Precautions

Keep refrigerated at 2-8℃ (35.6~46.4℉).

Shelf life is 36 months from manufacturing date.